The new 240v SuperHeat Digital Milk Warmer is the latest
advancement in milk warmers. The innovative temperature sensor now measures
liquid temperature at its coldest point – close to the base. This means the
liquid reaches pre-set temperature quickly and more accurately and makes
continuous heating possible without timing.
The teflon coated 2300W element is
now in a conical shape which heats the liquid faster by promoting greater
circulation. As warm liquid rises, and cool liquid falls the circulation is accelerated
by the constricted flow area of the cone shape.
Select one of two heating
programs with the touch of a button on the illuminated display: one button for
large volumes and one button for smaller volumes of less than 9 litres. The
SuperHeat will store your preferred temperature setting (from 10-90 degrees
Celsius) even when unplugged. This ensures your calves receive a precise and
consistent temperature each feed.
The red check light indicates that the milk
warmer is in heating mode, once set temperature is reached the element switches
off and the red check light extinguishes, the achieved target temperature then
flashes on the display and six audible beeps can be heard indicating that the
milk is now ready. (Note: residual heat from the element can cause the display
temperature to differ immediately but will conform to target temperature after
a short time).
If the milk warmer is left in the container, the milk will be
reheated again when the temperature drops to ensure the pre-set temperature is maintained.
Safety cut-out feature in the event of dry operation.
Maximum depth is 70cm.
Patent pending.
Clean after use by submerging or rinsing in cold water. Once
cooled the element should be wiped clean with warm soapy water.
Categories: Dairy Cattle, General Farm, Livestock, Shoof International.
