Bovi-Bond from USA is a proven application system for attaching blocksto the healthy claw of lame cow´s hooves. Bovi-Bond does not need anyspecial skill to mix and apply. The secret is in the double-barrel 180mladhesive cartridge and the special dispensing gun. This system ensuresthat the two parts of the adhesive mixture are kept entirely separateuntil they merge in the mixing tip. Then as the adhesive moves throughthe tip the internal spirals mix the product to correct formulation.Using Bovi-Bond is dead easy and needs no special skill: 1. Aftertreating the affected claw, the good claw is trimmed with a hoof knifeto leave a clean and dry surface. 2. Install the Bovi-Bond adhesivecartridge in the dispensing gun. Remove the cartridge cap with smallcutter or knife, and attach the mixing tip. 3. Squirt adhesive mix ontothe correct side (to fit the hoof) of the double-side block. Press theblock gently onto the cleaned claw, and hold still for 15 seconds forthe adhesive to set. That´s it. Done! Let her go. The block will wearoff or break off naturally, by which time, if you did the job right, theaffected claw should have made a recovery. Next time you need to applyBovi-Bond, remove and discard the used mixing tip (with set adhesiveinside), replace with a new tip and continue as in step 3. above.Bovi-Bond adhesive sets in approximately 30 seconds after application tothe block. It can be load-bearing after two minutes (or slightly longerin very cold weather). After some practice, it is quite normal toachieve up to 15 block applications from one adhesive cartridge. The12-pack set above contains the adhesive cartridge plus 12 mixing tipsand 12 blocks. The dispensing gun must be purchased separately. Afteropening, the Bovi-Bond adhesive cartridge must be used within one year.

$36.32 ex GST
$39.95 inc GST
Quantity
SKU: 200872. Categories: , .

VisaMastercardAmerican ExpressJCB

Categories: , .

Bovi-Bond Mixing Tips 12-pack

Bovi-Bond from USA is a proven application system for attaching blocksto the healthy claw of lame cow´s hooves. Bovi-Bond does not need anyspecial skill to mix and apply. The secret is in the double-barrel 180mladhesive cartridge and the special dispensing gun. This system ensuresthat the two parts of the adhesive mixture are kept entirely separateuntil they merge in the mixing tip. Then as the adhesive moves throughthe tip the internal spirals mix the product to correct formulation.Using Bovi-Bond is dead easy and needs no special skill: 1. Aftertreating the affected claw, the good claw is trimmed with a hoof knifeto leave a clean and dry surface. 2. Install the Bovi-Bond adhesivecartridge in the dispensing gun. Remove the cartridge cap with smallcutter or knife, and attach the mixing tip. 3. Squirt adhesive mix ontothe correct side (to fit the hoof) of the double-side block. Press theblock gently onto the cleaned claw, and hold still for 15 seconds forthe adhesive to set. That´s it. Done! Let her go. The block will wearoff or break off naturally, by which time, if you did the job right, theaffected claw should have made a recovery. Next time you need to applyBovi-Bond, remove and discard the used mixing tip (with set adhesiveinside), replace with a new tip and continue as in step 3. above.Bovi-Bond adhesive sets in approximately 30 seconds after application tothe block. It can be load-bearing after two minutes (or slightly longerin very cold weather). After some practice, it is quite normal toachieve up to 15 block applications from one adhesive cartridge. The12-pack set above contains the adhesive cartridge plus 12 mixing tipsand 12 blocks. The dispensing gun must be purchased separately. Afteropening, the Bovi-Bond adhesive cartridge must be used within one year.